Description
Key Features
- Supports 802.11a/n/ac standard(2*2 MIMO)
- The highest transmission rate of air interface is 867Mbps.
- Support maximum 20*4MP cameras loading at 3km.
- Outdoor transmission distance: 0~3km
- Integrated antenna, quick installation
- Shipped in pairs, no configuration required
- Support 48V PoE and DC 48V power supply. Supports PoE power supply to IP cameras.
- Support one-click pairing. Press and hold the Reset button for 1 seconds to activate the automatic pairing mode.
- Support intelligent channel analysis and automatic optimal channel selection
- Supports AP and relay modes.
- IP65
Specifications
| Hardware Specification | |
|---|---|
| Dimensions(mm) | 190×110×50mm |
| Weight(kg) | 0.38kg |
| Installation | Pole mounting, Wall mounting |
| Protection Level | IP65 |
| Antenna Gain | 14dBi |
| Beam Width | H：30°，V：30° |
| Max Power Consumption(W) | 60W |
| Physical Interface | 1*10/1000Mbps RJ45 (PoE In), 3*10/1000Mbps RJ45 (PoE Out) |
| Indicator Light | 1*Power Indicator 1*WLAN Indicator 1*LAN Indicator 4* Signal strength indicator 1* 5G WiFi indicator |
| Maximum Transmitted Power | 25±2dBm@802.11ac VHT20 MCS0 |
| Working Temperature | -30℃ to 55℃ |
| Working Humidity | -40℃ to 70℃ |
| Transmission Distance | 3km |
| Transmission Capability | 250Mbps/500m @AC80 130Mbps/500m @AC40 20×channels×4MP @AC80 10×channels×4MP @AC40 |
| Reset Button | Press and hold for 10 seconds to restore factory default settings, short press for 1 second to start pairing |
| Rx Sensitivity | -84±2dBm@AC80-MCS0 -65±2dBm@AC80-MCS9 |
| Channels Width | 20/40/80MHz, Auto/manual selection |
| ESD Protection | Contact 6KV , Air 8KV |
| Surge | POE/GE: CM 2KV , DM 1KV |
| POE | PoE IN：IEEE 802.3bt/af/at PoE OUT：IEEE 802.3af/at PoE OUT: 45W |
| Power Supply | ModeA: powered by 48V passive POE injector ModeB: Powered by DC48V adapter |
| Software Specification | |
| Protocol | IEEE 802.11a/n/ac |
| Frequency | 5.150GHz～5.850GHz (Note: Available channel may vary with local regulations.) |
| Network Mode | Bridge |
| Management | Web |
| Ethernet | IPv4 static, GHCP, VLAN, IGMP Snooping, Multicast Acceleration |
| WiFi | Relay, User Isolation, Transmitted Power set |
| System and Maintaince | Supports device upgrade, factory settings restoration, configuration import, configuration export, and device restart on the software. Support system log and remote log. Support NTP. |
| Security | WPA2-PSK, Hidden SSID, MAC Filtering |
Downloads
- Datasheet: UNV WB-3000-5AC-P-KIT-IN 5G Outdoor High-performance Bridge.pdf
- Quick Guide: Quick Guide.pdf
Reviews
There are no reviews yet.