| Power Input |
| Input Type |
AC 100 V to 240 V |
| Input Port |
3-pin Connector, For the final installation, a UL 489-certified, 20-ampere circuit breaker must be be installed at the front end. |
| Power Output |
| Socket |
1-ch 5A, US socket |
| DC 12V |
1-ch 2.5A, DC5521, Used for powering the router |
| DC 48V |
AC 100 ~ 240V to DC 48V, 2.3A, 2 Pin Phoenix terminal |
| Dedicated Power Interface (Pre-Wired Internal Cabling) |
| Fan Power Interface |
DC12V, 2.5A |
| Heater Power Interface |
AC 100 ~ 240V to DC 12V, 8A |
| Router Power Interface |
DC12V, 2.5A |
| Warning Light Power Interface |
DC12V, 2.5A |
| Function |
| System Functional Description |
Overvoltage and Overload Protection,Power Information Collection,Power Switch Detection,Power Switch Control,Thermostatic Fan,Thermostatic Heater,Automatic Network Restart,Door Open Detection,Warning Light,Fault Reporting and Analysis |
| Power Lightning Protector |
| Maximum discharge current |
40 kA |
| Rated discharge current |
20 kA |
| Response time |
L-PE ≤ 25 ns, N-PE ≤ 25 ns |
| General |
| Surge Protection |
6 kV |
| Working Temperature |
-40 ℃ to 70 ℃ (-40 ℉ to 158 ℉) |
| Working Humidity |
≤ 90% RH (non condensing) |
| Weight (Without Camera) |
≤ 15 kg (33.07 lb) |
| Dimensions |
650 (H) × 424 (W) × 230 (D) mm |
| Slot dimensions |
The space has a depth of 55mm and a width of 190mm for installing a 4G router, Select a 4G router with DC 12V round plug power supply, total power consumption not exceeding 30W, and at least 2 LAN ports. |
| Rating |
IP56, Custom stainless-steel enclosures available to meet NEMA 4X requirements. |
| Certification |
CE-EMC, FCC |
| Consumption |
| No-load power consumption |
At ambient temperature of 25°C: 5.7 W (No HDD heating, No Heater, No Fan, No Alarm Light) |
| Full-load power consumption |
At ambient temperature of 25°C: 125W (Heater, Fan, Alarm Light) |
| Adaptable Mounting Bracket |
| Left side |
Up to 2 units can be installed, supporting TR-JB07/WM03-F-IN-V2, TR-JB07/WM03-G-IN-V2, TR-JB07/WM03-H-IN-V2, TR-JB07/WM04-B-IN-V2, TR-JB05-B-IN or TR-JB07-D-IN-V2 |
| Right side |
Up to 2 units can be installed, supporting TR-JB07/WM03-F-IN-V2, TR-JB07/WM03-G-IN-V2, TR-JB07/WM03-H-IN-V2, TR-JB07/WM04-B-IN-V2, TR-JB05-B-IN or TR-JB07-D-IN-V2 |
| Bottom |
Up to 1 unit can be installed, which cannot be installed simultaneously with the IP Speaker and supports TR-UF45-A-IN (Only 4-inch PTZ) |
| Top |
Support the installation of an IP speaker, no mounting bracket required. |
Reviews
There are no reviews yet.