Description
Key Features
- Supports Wiegand/RS 485 data output.
- Built in buzzer.
- Supports indoor and outdoor application.
- Stability, sensitivity, and responsiveness.
- Supports ISO 14443 A and ISO 14443 B protocols.
Specifications
| Hardware Specification | |
|---|---|
| Operating Frequency | 13.56 MHz, 125 KHz |
| Interface | 1 x Wiegand (supports 26/34 DIP switch selection, default Off is 34, On is 26), 1 x RS485 |
| Dimensions (L x W x H) | 128.8 x 88 x 25 mm |
| Weight | 132g |
| Mount Method | 115 x 73 mm junction box (120 box), 86 x 86mm junction box |
| Operating Temperature | -30°C to 65°C |
| Operating Humidity | 10% to 90% |
| Storage Temperature | -40°C to 65°C |
| Indicator | Steady blue: Normal operation; |
| Power Consumption | 1.0W |
| Operating Voltage | DC 12V ± 25% |
| Operating Current | 81mA |
| Reading Distance | EM card: max.3cm Large IC card: max. 3cm Small IC card: max. 1cm |
| Authentication Mode | Card |
| Protection Level | IP65 |
| Mifare Card Control | Configure card reading (sector number, block number, sector offset, length, access key) information via 485 |
| DIP Switch | 8-bit Bit 1-4: 485 address bits (default 0000; 0 is Off, 1 is On). Bit 5: Mode switch (Off for Wiegand, On for 485). Bit 6: Wiegand protocol (default Off for Wiegand 34, On for Wiegand 26). Bit 7: Termination resistor (default Off for disabled, On for enabled). Enable when 485 line distance is long or interference is strong. Bit 8: Reserved. |
| Upgrade | Supports software upgrade via 485 interface |
| Tamper Alarm | Support, continuous rapid "beep" alarm |
| Physical | |
| Material | Rigid PC |
| Basic Business | |
| Reading Time | < 1s |
| Card Type | EM card, Mifare card |
Downloads
- Datasheet: UNV OEC-R3H-ME Wall Mounted Card Reader.pdf
Reviews
There are no reviews yet.