ISW5000-8GT4GP-POE-IN Harsh POE Switch

Uniview

ISW5000-8GT4GP-POE-IN Harsh POE Switch

Harsh POE Switch

  • Free delivery on orders over ₨ 15,000.00
  • 30-day returns, no restocking fee
  • Secure, encrypted checkout

Description

Key Features

  • PoE supports IEEE 802.3af/at standards and provides a maximum output of 30W for each port.
  • Data transmission and power supply distance up to 100 meters.
  • Supports IEEE802.3x full-duplex flow control and Backpressure half-duplex flow control.
  • Panel indicators monitor working status and assist in fault analysis.
  • Supports one-click ring network and one-click storm suppression, featuring redundancy and high reliability.
  • Highly reliable design, supporting traditional STP/MSTP/RSTP Layer 2 link protection technology.
  • Support static convergence and dynamic convergence (LACP) 2 convergence modes, effectively increase the link bandwidth, improve the reliability of the link, and at the same time can achieve load balancing, link backup.
  • Flexible and convenient management and maintenance Supports various management modes, such as Console, Telnet, and SSH.
  • Supports WEB management, which is simple and efficient, and facilitates installation and debugging by engineering and maintenance personnel.
  • Supports file upload and download management through TFTP.

Specifications

Hardware Specification
Standards IEEE802.3、IEEE802.3u、IEEE802.3z、IEEE802.3ab、IEEE802.3x、IEEE802.3af、IEEE802.3at
Ports Type 8*10/100/1000Mbps RJ45 Ports 4*1000Mbps SFP Slots
Switching capacity 24Gbps
Jumbo Frame 9KBytes
Forwarding performance 17.86Mpps
MAC 8K
Transfer Mode Store-and-forward
Max.PoE Power Max capacity: 120W Max capacity for single port: 30W Mode A 1/2（-），3/6（+）
Dimensions (W×D×H) 145*109*62.3mm
Operating Temperature -30°C to 65 °C
Operating Humidity 5% ~ 95% non-condensing
Storage Humidity 0% ~ 95% non-condensing
Indicator PWR, LNK/ACT
Electrostatic Standard Contact ±6KV, Air ±8KV
Surge Protection Differential mode ±2KV Common mode ±4KV
Power Supply DC:48-57V, Adapter: AC100-240V, 50/60Hz
Software Specification
MAC Address MAC Aging Time MAC Filter MAC Notification
Basic Management Console/Telnet/SSH Http/Https、SSL/TLS FTP/TFTP Syslog SNMP(v1/v2c/v3)、SNMP Trap SNTP/NTP CPU protect Software/Hardware watchdog Firmware Upgrade/Backup Ping/Traceroute
Port Config Bandwidth Control Flow Control EEE MTU CFM(802.1ag) EFM OAM(802.3ah) DDM Storm Control Port Isolation Port Security Virtual Cable Test ULDP
Discovery LLDP(802.1ab) LLDP-MED
Link Aggregation Static LACP(802.3ad) Load Balance(src-mac/dst-mac/src-ip/dst-ip) Max groups and ports per group
VLAN VLAN(802.1Q 4K) Access/Trunk/Hybrid Private VLAN VLAN Filter MAC-based VLAN Protocol-based VLAN IP Subnet-based VLAN Voice VLAN GVRP/GMRP QinQ/Selective-QinQ/Flexible QinQ VLAN Translation/N:1 VLAN Translation Guest VLAN
Network Loop Detection Loopback Detection ERPS
Spanning Tree STP/RSTP/MSTP MSTP Support 64 instance BPDU Guard/Root Guard/BPDU Tunnel
ARP Static ARP ARP Scanning Prevention ARP Spoofing Prevention ARP Guard Gratuitous ARP Dynamic ARP Inspection ARP Quantity Control
ICMP Anti ICMP Attack ICMP Rate Limit ICMP Unreachable Drop
IP Forward Static Route Route Aggregation
Multicast VALN Multicast VALN
IGMP IGMP SNOOPING V1/V2/V3 Fast Leave IGMP Proxy
DHCP DHCP Server DHCPv4 Client/BOOTP DHCPv4 Relay DHCPv4 Snooping DHCPv4 Option 82/43/60/61/67
IPv6 Basic IPv6 ND Snooping
DHCPv6 DHCPv6 Relay DHCPv6 Snooping IPv6 SAVI Security RA DHCPv6 Server
IPv6 Unicast Routing Static Route
IPv6 Multicast Routing MLD v1/V2 Snooping
IPv6 Features SNMP over IPv6 Support HTTP over IPv6 Support SSH over IPv6 Support DNS over IPv6 Support IPv6 ping/traceroute Support IPv6 Telnet Support IPv6 Radius+ Support IPv6 Tacacs+ Support IPv6 SNTP/NTP Support IPv6 FTP/TFTP Support IPv6 IPSec Support IPv6 ACL
Basic Trust COS/DSCP Trust Port
Scheduling SP WRR WDRR
PolicyMap Stream Based on VLAN Based on COS/DSCP Aggregate PolicyMap Ingress PolicyMap
Policing CAR Stream Shaping(leak algorithm) Ingress Policing
Rewrite COS/802.1p Priority IP Precedence IPv4 DSCP/IPv6 DSCP drop-precedence internal-priority Ingress/Egress Rewrite
Queuing DSCP to DSCP mapping DSCP to DP mapping DSCP to Queue mapping COS to DP mapping COS to Queue mapping
IP-ACL SIP/DIP IP Protocol IP Priority(DSCP,TOS, Precedence) TCP,UDP src,dst Port
MAC-ACL SRC/DST MAC VLAN COS Tag/Untag
IP-MAC ACL MAC-ACL and IP-ACL
User-defined ACL Base on user defined profile
ACL Features Based on time period ACL ACL on VLAN Based on ACL Stream
802.1x Port Based Authentication Support EAPoR MAC based Authentication Guest VLAN
MAB Based on Port Authentication Based on MAC Authentication
MAC Address Count Limit Based on Port Based on VLAN
IP Address Count Limit Based on Port Based on VLAN
Access Management Based on source mac and IP address
Deny DoS Attack TCP Flag TCP Flagment IP Segment ICMP
TACACS+ Standard Support
Radius Standard Support Client, Support MD5
SSL Openssl 1.1.0
MRPP Compatiable ERRP
ULPP Uplink Protection Protocol Smart Link/Monitor Link
ULSM Uplink State Monitor
Mirror Support one to one, multi to one Port based mirror, support ingress, egress, and both CPU based mirror Flow based mirror RSPAN
PoE Management ON/OFF Config Alive Checking for PD 7/24 On/Off Scheduling

Downloads

Product specifications
Dimensions14.5 × 10.9 × 6.23 cm

Reviews

There are no reviews yet.

Be the first to review “ISW5000-8GT4GP-POE-IN Harsh POE Switch”

Your email address will not be published.

Related products